[Run only one Hilux in the world! ] This is a complete electric radio control car that reproduces a one-off model produced by TOYOTA (GB) PLC of the United Kingdom for the promotion of Toyota Hilux. Based on the extra cab that is an extension of the two-door single cab, the front and rear fenders have been expanded to create a more powerful mood and the polycarbonate is fully modeled. The body is painted in brilliant blue, the sleeper cab is painted in pearl white, and stickers such as the Tamiya logo and sponsor mark are already affixed, as well as unique boar illustrations. The window was painted with smoke. The front and rear light cases and door mirrors use plated parts to enhance the scale.
[CC-01 is a tough four-wheel drive chassis that can be used anywhere.] The motor is installed vertically on the front of the bathtub frame, which is light and high in strength, to the front via gears, and via the propeller shaft. Full-time 4WD CC-01 that transmits power to the rear. The front suspension is a double wishbone type with an upper I arm and a lower H arm at the front, and a 4-link rigid at the rear. Equipped with a CVA oil damper. Beautifully chrome-plated wheels are fitted with mud terrain type hollow rubber block tires. In addition to having differential gears on the front and rear, the differential inside the rear axle can also be assembled into a lock specification. , High running ability on rough roads further enhances the fun of control. Realistic body and tough Cross-country driving is also fun in the chassis.
[Using 2.4G R / C system that can be easily played with multiple units]Not only the painted body, but also a wheel trigger type transmitter ideal for car control, a 7.2 V battery for driving, and a charger are set. RC mechanism does not require band adjustment such as crystal replacement etc. 2.4GHz specifications that can be enjoyed by multiple units. 2.4GHz, which is also used for computer wireless LAN, has a one-to-one correspondence between transmitter and receiver (vehicle), so there is no need to worry about interference, and transmitter and receiver since the machine is already paired, there is no need for cumbersome setup work. in addition, the transmitter can be adjusted by adopting. desorb the grip cover and the trigger cover, is also easy-to-operate structure in the smaller of the hand.
[basic Specifications] ● Length: 465mm, overall width 200mm, Height 180mm ● with wheel base 267mm ● tread = 160mm both the front and rear ● tire width / diameter (front and rear) 33 / 88mm ● frame = ladder frame style Stub type ● Driving method = Vertical motor / shaft drive 4WD ● Differential gear system = Back and front: 3 bevels ● Suspension = Front: Double wishbone, Rear: 4 link rigid ● Damper = CVA oil damper for both front and rear ● Gear ratio = 1: 14.67 ● Equipped with ESC (Electronic Speed Controller) for smooth forward and backward speed adjustment ● Motor = RS540 type
[ Required separately] ● Four AA batteries for transmitter