Tamiya 70267 Rolling Robot (2-Channel IR Remote Control)

田宮 70267 滾動移動機械人 (2ch紅外線遙控)

This assembly kit creates the Rolling Robot which can be operated by an infrared controller. The robot has two big hemispherical wheels, gearboxes, two motors and receiver, and offers the following motion: forward, reverse, right and left turns and pivot turns. LEDs light up, and speed can be adjusted to 16 levels. Everything needed – including pre-assembled receiver and gearboxes – is included for easy snap-fit/screw-together assembly.

【About the Rolling Robot】

• Length: 120mm, width: 130mm, height: 120mm (approximate dimensions). Weight: approximately 260g (including batteries).
• Speed: about 12cm/s. (The model moves 1meter in about 8 seconds.)
• Continuous running time: about five hours.
• Challenge level: 3 (5 is the highest.). Approximate assembly time: 120 – 180 minutes.
• This assembly kit creates the Rolling Robot which has one big hemispherical wheel each for right and left, and this robot gets back to the original position even if it falls on its side.
• Operate this Rolling Robot with the kit-included Infrared Remote Control Unit (infrared remote controller and receiver). The robot has one motor each for right and left wheels, and offers following motion: forward, reverse, right and left turns and pivot turn.
• Attach two arms and two stabilizers in any of eight attachment positions you like to enjoy different motion. (e.g. The robot can push things with two arms.)
• Two assembled gearboxes have two motors (one motor for each gearbox) and require wiring only.
• The part which looks like a robot face has a 5mm diameter hole which allows modifications such as LED attachment.
• Battery case features removable terminals which ensure ease of wiring.
• The unit composed of two assembled gearboxes has two tapping screw holes at a 40mm interval, letting customers use it in different construction projects, too.
• Please note that the rolling robot cannot be operated outside (under sunlight). The operation of robot within 1.5-meter distance is recommended.

【About the Infrared Remote Control Unit (infrared remote controller and receiver)】

• The infrared remote controller features a distinctive Tamiya design. The infrared LED sends signals to the receiver on the robot according to buttons pushed.
• The receiver has two output terminals which not only motors but also sold separately LED lights can be connected. Buttons allow easy attachment and detachment of terminals.

【Batteries required (sold separately)】

• R03/AAA/UM4 batteries x3 (for Rolling Robot)
• Coin battery (CR2025) x1 (for Infrared Remote Control Unit)