Tamiya 18106 NEO-VQS (VZ CHASSIS) ADVANCED PACK

這是將 Neo VQS 套件與在賽場上活躍所需的調校零件合而為一的特殊套裝。以稜角鮮明的造型與輕快奔馳為特長的 Neo VQS，車身採煙燻色，VZ 底盤以黑色與透明黃協調搭配，並附上專屬設計的金屬質感貼紙。注目的調校零件包括：扭力與速度平衡優異的 Light Dash 馬達，以及 FRP 製前寬支架與後煞車支架，煞車與穩定桿的設定萬全；搭配抑制跳躍後彈跳的質量阻尼器（Mass Damper）與超硬小徑低高度輪胎，大幅提升起伏劇烈的高速賽道完跑率。此外，中空傳動軸、高速 EX 過輪、碳纖維強化齒輪等，輕量化與驅動系統的升級也不容錯過。套件並附上零件組裝用的「扳手」「六角扳手」等工具，初次入門也能安心著手。這是滿載提升 Neo VQS 性能之關鍵零件、推薦給目標挑戰高一階奔馳的賽車手的套件。

【由 VS 底盤進化而來的 VZ 底盤】長年於賽場使用、信賴度高的小型・輕量・短軸距 VS 底盤，將其性能進一步磨練提升的，就是 VZ 底盤。保留 VS 底盤的小迴轉性能與高整備性等優點，並強化保險桿、後支架基座、傳動軸軸承等部位的強度，具備吸收衝擊的適度「韌性」也是特點之一。此外，不僅後滾輪支架，前保險桿也可分割，設定自由度大幅提升。車軸軸承採用摩擦阻力小的 POM 樹脂製 620 滾珠軸承；底盤本體與齒輪蓋等 A 零件為 ABS 樹脂製，齒輪比配備 3.7:1。

【基本規格】●完成時全長159mm、全寬104mm、全高43mm ●附馬達 ●車身=ABS樹脂製（煙燻色）●VZ底盤本體=ABS樹脂製（黑）、A零件=ABS樹脂製（透明黃）●輪胎=超硬小徑低高度（黑）●輪圈=A輻條（黃）●齒輪比=3.7:1 ●附金屬質感貼紙 ●免接著劑，卡榫與螺絲固定組裝

【調校零件】●Light Dash馬達 ●FRP前寬支架（×2）●FRP多用途強化板（×2）●FRP後煞車支架 ●煞車海綿（2mm厚・藍/紅）●13mm低摩擦塑膠滾輪（×6）●2mm蓋帽螺絲（25mm×2／30mm×2）●1.4mm中空輕量傳動軸 ●碳纖維強化齒輪G13・8T小齒輪 ●高速EX過輪（3.7:1）●超硬小徑低高度輪胎（黑）●側質量阻尼器套組

【初回發售月】2020年

This special pack combines the Neo VQS kit with the tune-up parts needed to shine in races. The Neo VQS, known for its sharp-edged styling and light, agile running, features a smoke-colored body with a VZ chassis color-coordinated in black and clear yellow, plus a dedicated metallic-look sticker set. Notable tune-up parts include the Light Dash Motor with its well-balanced torque and speed, along with FRP front wide stay and rear brake stay for complete brake and stabilizer pole settings. Together with the mass damper that suppresses bouncing after jumps and super-hard small-dia. low-profile tires, they greatly raise the finishing rate on high-speed courses with fierce elevation changes. Don’t miss the hollow propeller shaft, High-Speed EX counter gear, and carbon-reinforced gear for weight reduction and drivetrain upgrades. Assembly tools such as a wrench and hex wrench are included, so even first-timers can build with confidence. A kit packed with key items for boosting Neo VQS performance, recommended for racers aiming one class higher.

The VZ chassis further refines the small, lightweight, short-wheelbase VS chassis — a long-time race staple with proven reliability. It keeps the VS strengths of nimble cornering and easy maintenance while strengthening the bumper, rear stay base, propeller shaft bearings, and more; its moderate “flex” absorbs shocks well. The front bumper, as well as the rear roller stay, can be split for far greater setup freedom. Shaft bearings use low-friction POM resin 620 ball bearings, the chassis body and gear cover A-parts are molded in ABS resin, and a 3.7:1 gear ratio is fitted.

[Basic Spec] Length 159 mm, width 104 mm, height 43 mm when completed / motor included / body: ABS resin (smoke) / VZ chassis: ABS resin (black), A-parts: ABS resin (clear yellow) / tires: super-hard small-dia. low-profile (black) / wheels: A-spoke (yellow) / gear ratio 3.7:1 / metallic-look stickers included / no glue required, snap-fit and screw assembly

[Tune-up Parts] Light Dash Motor / FRP front wide stay (x2) / FRP multi-reinforcing plate (x2) / FRP rear brake stay / brake sponge (2mm, blue/red) / 13mm low-friction plastic rollers (x6) / 2mm cap screws (25mm x2, 30mm x2) / 1.4mm hollow lightweight propeller shaft / carbon-reinforced gear G13 with 8T pinion / High-Speed EX counter gear (3.7:1) / super-hard small-dia. low-profile tires (black) / side mass damper set

[First Release] 2020