Tamiya 57909 1/10 SCALE EXPERT BUILT COMICAL HORNET (WR-02CB CHASSIS)
$1,788.00
田宮 57909 XB系列 1/10RC XB Comical Hornet 大黃蜂(WR-02CB底盤)
已售完
田宮 57909 XB系列 1/10RC XB Comical Hornet 大黃蜂(WR-02CB底盤)
【充滿動感的奔馳・有趣得讓人著迷!】
這是將1984年登場、掀起2WD越野車熱潮的大黃蜂(Hornet)以可愛風格大膽變形而成的電動RC完成品。前後大幅緊縮、強調座艙的有趣造型車殼與大型尾翼,採用輕量且堅固的聚碳酸酯製成;車殼與尾翼當然已預先完成組裝與噴塗,就連讓奔馳更添樂趣、身穿T恤的車手人形也已是組裝塗裝完成的狀態。宛如觸角般聳立的2支天線柱,以及車尾的雙出大型擴音器排氣管,更凸顯出本車的滑稽魅力。底盤採用後輪驅動的WR-02CB,搭配無論鋪裝路或顛簸越野路都能盡情奔馳的泡狀輪胎(Bubble Tyre);只需捏住發射機的油門扳機,即可輕鬆享受抬起前輪的翹頭行駛。本車為預先完成組裝的XB(Expert Built)完成品,並已捆綁2.4GHz發射機、行駛用7.2V電池與充電器,到手即可立即開跑。
【搭載奔馳樂趣的後輪驅動WR-02CB底盤】底盤採用以後輪驅動WR-02為基礎的WR-02CB,即使是初學者也容易駕駛,翹頭也輕鬆易做。車輪周邊配備長行程懸掛臂與CVA油壓避震器,即使在崎嶇越野路面也能暢行無阻;在鋪裝路面行駛當然也沒問題。底盤側面設有側護板,能在意外翻覆時保護馬達,同時帶出越野車的氣勢。安裝於車尾的翹頭支架,不僅能防止翹頭時向後翻倒,還可改變安裝位置來調整翹頭行駛的狀態。橙白配色的搶眼輪圈為2片式結構,演出俐落的奔馳。輪胎方面,前輪配備直進穩定性高的肋狀胎紋、後輪配備抓地力十足的圓形塊狀胎;渾圓獨特的泡狀輪胎,更將本車的滑稽氛圍襯托得淋漓盡致。ESC(電子變速器)搭載對應15.5T以上無刷馬達的附感應器型號TBLE-04S。
【使用多台同樂也輕鬆的2.4GHz發射機】除了已完成噴塗的車殼與完成車體之外,還捆綁了容易操控的扳機式發射機、行駛用7.2V電池與充電器。RC電波系統採用2.4GHz發射機套裝,無需更換晶體等頻段調整,即可輕鬆地多台同樂。2.4GHz頻段也被電腦的無線LAN等採用,發射機與接收機(車體)以1對1對應,完全不必擔心混頻;而且發射機與接收機出廠前已完成配對,省去繁瑣的設定作業。此外,發射機可拆裝握把護套與扳機護套,調整成手小的使用者也能輕鬆操作的尺寸。
【基本規格】●全長356mm、全寬244mm、全高191mm ●軸距170mm ●馬達=540型 ●驅動方式=後輪2輪驅動 ●輪胎寬/直徑=前46/95mm、後56/98mm ●輪距=前189mm、後186mm ●車架=樹脂製單體式(Monocoque) ●差速方式=3錐齒輪差速器 ●轉向橫拉桿=2段分割 ●懸掛=雙A臂4輪獨立 ●避震器=CVA油壓避震器 ●齒輪比=1:18.3 ●搭載ESC(電子變速器)
【模型要點】
- ★將1984年登場、掀起2WD越野車熱潮的大黃蜂(Hornet)可愛變形化的1/10 RC電動車——XB(Expert Built)預組裝完成品,到手即可開跑。
- ★前後緊縮、強調座艙的有趣造型車殼與大型尾翼為輕量堅固的聚碳酸酯製,出廠即已組裝噴塗完成;身穿T恤的車手人形亦是組裝塗裝完成狀態。
- ★2支觸角般的天線柱與車尾雙出大型擴音器排氣管,凸顯滑稽魅力。
- ★後輪驅動WR-02CB底盤:長行程懸掛臂+CVA油壓避震器,鋪裝路與越野路皆宜;只需捏住油門扳機即可輕鬆享受翹頭行駛。
- ★橙白配色2片式輪圈;前輪肋狀胎紋、後輪圓形塊狀胎的泡狀輪胎,營造滿滿的滑稽氛圍。
- ★ESC搭載對應15.5T以上無刷馬達的附感應器型號TBLE-04S。
- ★捆綁2.4GHz扳機式發射機、行駛用7.2V電池與充電器;免晶體調整、免配對設定,多台同樂輕鬆自在;發射機握把與扳機護套可拆裝,適合手小的使用者。
【Action-Packed Fun on Four Wheels!】
This is a factory-finished electric R/C car that playfully deforms the Hornet — the machine that debuted in 1984 and sparked the 2WD off-road boom — into an adorable, comical form. The body and rear wing, with the wheelbase shortened and the cockpit emphasized for a comically fun silhouette, are made of lightweight and durable polycarbonate; the body and wing come pre-assembled and pre-painted, and even the T-shirted driver figure that makes running more fun is fully assembled and painted. The two antenna poles resembling insect antennae and the twin megaphone mufflers at the rear further accentuate the car’s comical charm. The chassis is the rear-wheel-drive WR-02CB with bubble tyres that are fun on everything from paved roads to rough off-road terrain — squeeze the throttle trigger on the transmitter and enjoy wheelies that lift the front wheels off the ground. As an Expert Built (XB) factory-assembled model, the car comes bundled with a 2.4GHz transmitter, a running 7.2V battery and a charger, ready to run straight out of the box.
【Rear-Wheel-Drive WR-02CB Chassis Packed with Running Fun】The chassis employs the WR-02CB, based on the rear-wheel-drive WR-02. It is easy to drive even for beginners, and wheelies are simple to perform. Long suspension arms and CVA oil dampers allow the car to power through rough off-road sections, while running on paved surfaces is of course also possible. Side guards protect the motor in the event of a rollover while bringing out the buggy look. The wheelie bar fitted at the rear not only prevents the car from flipping over backward during wheelies, but its mounting position can also be changed to fine-tune wheelie running. The eye-catching orange-and-white wheels have a 2-piece construction for crisp running. Tyres feature high-straight-stability rib patterns at the front and grippy round-block patterns at the rear; the rounded, uniquely shaped bubble tyres further enhance the comical mood. The ESC is the sensor-equipped TBLE-04S, compatible with brushless motors of 15.5T or higher.
【2.4GHz Transmitter for Easy Multi-Car Fun】Along with the pre-painted body and finished car, the set is bundled with an easy-to-control wheel-trigger-type transmitter, a running 7.2V battery and a charger. The R/C system uses a 2.4GHz transmitter set requiring no crystal swaps or band adjustments, making carefree multi-car running possible. The 2.4GHz band — also used by computer wireless LANs — pairs one transmitter with one receiver (car), so there is no worry of interference, and since the transmitter and receiver are pre-paired, no troublesome setup is required. The transmitter’s grip cover and trigger cover can also be detached and reattached to suit smaller hands.
【Basic Specifications】●Length 356mm, Width 244mm, Height 191mm ●Wheelbase 170mm ●Motor: Type 540 ●Drivetrain: Rear 2-wheel drive ●Tyre Width/Diameter: Front 46/95mm, Rear 56/98mm ●Tread: Front 189mm, Rear 186mm ●Frame: Resin monocoque ●Differential: 3-bevel differential ●Steering tie-rod: 2-piece split ●Suspension: Double wishbone, 4-wheel independent ●Dampers: CVA oil dampers ●Gear ratio: 1:18.3 ●Electronic Speed Controller (ESC) equipped.
【Model Features】
- ★ The Hornet — which debuted in 1984 and sparked the 2WD off-road boom — comically deformed into a 1/10 scale electric R/C car in factory-assembled XB (Expert Built) form, ready to run out of the box.
- ★ Polycarbonate body and rear wing come pre-assembled and pre-painted; the T-shirted driver figure is also fully assembled and painted.
- ★ Two antenna poles resembling insect antennae and twin rear megaphone mufflers accentuate the comical styling.
- ★ Rear-wheel-drive WR-02CB chassis with long suspension arms and CVA oil dampers for both on-road and off-road running; easy wheelies at a squeeze of the throttle trigger.
- ★ Orange-and-white 2-piece wheels; bubble tyres with rib patterns at the front and round-block patterns at the rear.
- ★ Sensor-equipped TBLE-04S ESC, compatible with brushless motors of 15.5T or higher.
- ★ Bundled with a 2.4GHz wheel-trigger transmitter, running 7.2V battery and charger; no crystals, no pairing setup — multi-car fun made easy, with detachable grip and trigger covers for smaller hands.
【圖片合集|XB Comical Hornet】Image Gallery
※XB完成品版官網未提供產品細節圖,以下細節圖採用同款散件版本 Item 58666 的官方圖片(原始檔名 58666_4c1~58666_4c13),並附官網散件版頁面的圖片說明譯文。
XB Comical Hornet 完成品(捆綁 Finespec 2.4G發射機、行駛用電池與充電器)
大膽變形大黃蜂的造型,可愛之中亦不失銳利印象
大黃蜂特徵的大型尾翼,與氣勢十足的泡狀輪胎預告愉快的奔馳
附可透過零件組合改變頭盔形狀的車手人形;臉部為獨立零件,輕鬆上色
車手臉部備有多種眼睛圖案的設計,可組合再現各式車手表情
電池縱置的纖巧單體式車架中央配置馬達,經齒輪將動力傳至後輪;並裝備側護板保護馬達
組裝較費工的齒輪盒已預先完成(圖為同款散件版本的組裝說明例)
車頭與車尾的燈殼可安裝另售的直徑5mm LED燈光組件(官方散件版頁面說明),享受升級樂趣【以下需另購】The Following Are Sold Separately
以下需另購(來源:日本田宮官網 tamiya.com / products/57909,原文「送信機用単3形電池4本」)。行駛用7.2V電池、充電器與2.4GHz發射機均已捆綁附屬,無需另購。
- ★發射機用單3形電池(3號電池)×4
【關連商品】Related Products
以下關連商品整理自日本田宮官網 57909 產品頁 RELATED PRODUCTS 欄目
| 圖片 | 分類 | 商品名 | Item 編號 |
|---|---|---|---|
![]() |
RC模型 | 1/10RC Comical Hornet(WR-02CB底盤)組裝套件 | 58666 |
![]() |
RC模型 | 1/10RC Comical Grasshopper(WR-02CB底盤)組裝套件 | 58662 |
![]() |
RC模型 | 1/10RC XB Comical Grasshopper(WR-02CB底盤)完成品 | 57908 |
| 尺寸 | 356 × 244 × 191 公分 |
|---|









