Sold out
Tamiya 47530 1/10 SCALE R/C MOTUL AUTECH Z LIGHTWEIGHT BODY PARTS SET：圖片 1
Tamiya 47529 1/10 SCALE R/C ENEOS X PRIME GR Supra LIGHTWEIGHT BODY PARTS SET
Tamiya 47529 1/10 SCALE R/C ENEOS X PRIME GR Supra LIGHTWEIGHT BODY PARTS SET $360.00
Back to products
Tamiya 15552 LARGE DIA. TIRE & WHEEL SET for EZ CHASSIS (WIDE TREAD)
Tamiya 15552 LARGE DIA. TIRE & WHEEL SET for EZ CHASSIS (WIDE TREAD) $40.00

Tamiya 47530 1/10 SCALE R/C MOTUL AUTECH Z LIGHTWEIGHT BODY PARTS SET

$360.00

田宮 47530 1/10 RC特別企画商品 MOTUL AUTECH Z 輕量車體零件套件

已售完

貨號: TA 47530 分類: , , , 標籤:
描述


[/vc_column_text][/vc_column][/vc_row]

田宮 47530 1/10 RC特別企画商品 MOTUL AUTECH Z 輕量車體零件套件

【有助RC性能提升與調校的零件】

在2023年SUPER GT開幕戰奪冠、全年排名第3位的NISMO車隊賽車——MOTUL AUTECH Z，是以聚碳酸酯重現其身影的車體零件套件。前方進氣口大面積開口、左右追加小型導流翼的前部，加上展現複雜造形的左右車門下部，以及車體後部的擴散器等，立體感十足的完成度。輕量車體將標準規格的1.0mm厚聚碳酸酯薄化至0.8mm厚，在輕量化的同時也發揮低重心化的效果。除了聚碳酸酯車體與頭燈盒、小型導流翼，還附ABS樹脂製後視鏡、大型尾翼，以及標記用貼紙與分色塗裝用遮蓋貼紙。可搭載於TT-02，以及TA08、TC-01、BT-01底盤。

【基本規格】0.8mm厚聚碳酸酯製車體

【模型要點】

  • ★2023年SUPER GT開幕戰奪冠、全年排名第3位的NISMO車隊賽車MOTUL AUTECH Z，以聚碳酸酯車體重現。
  • ★前方進氣口大面積開口、左右追加小型導流翼，加上複雜造形的車門下部與車體後部擴散器，立體感十足。
  • ★輕量車體將標準規格的1.0mm厚聚碳酸酯薄化至0.8mm厚，同時實現輕量化與低重心化。
  • ★附頭燈盒、小型導流翼、ABS樹脂製後視鏡、大型尾翼、標記用貼紙與分色塗裝用遮蓋貼紙。
  • ★可搭載於TT-02、TA08、TC-01、BT-01等底盤（全寬188mm以下適用，部分底盤需調整孔位）。
  • ★以RC用聚碳酸酯專用噴漆自行塗裝，即可完成充滿臨場感的賽車塗裝。

【Body Parts for RC Performance and Tuning】

The MOTUL AUTECH Z — the machine fielded by the NISMO team that won the opening round of the 2023 SUPER GT season and finished 3rd in the year-end standings — is faithfully recreated in polycarbonate in this body parts set. A wide front air intake opening flanked by small canards, intricately sculpted lower sections of the doors, and a diffuser at the rear combine for a thoroughly three-dimensional finish. The lightweight body thins the standard 1.0 mm-thick polycarbonate down to 0.8 mm, delivering weight reduction while also aiding a lower center of gravity. Along with the polycarbonate body, headlight cases and canards, the set includes ABS resin door mirrors, a large rear wing, marking stickers, and masking seals for color separation. It fits chassis including the TT-02, as well as the TA08, TC-01, and BT-01.

[Basic Spec] 0.8 mm-thick polycarbonate body

【Model Features】

  • ★ Faithful polycarbonate recreation of the MOTUL AUTECH Z, winner of the opening round and 3rd in the year-end standings of the 2023 SUPER GT, from the NISMO team.
  • ★ A wide front air intake flanked by small canards, sculpted lower door sections, and a rear diffuser combine for a thoroughly three-dimensional finish.
  • ★ Lightweight body thins the standard 1.0 mm polycarbonate to 0.8 mm, combining weight reduction with a lower center of gravity.
  • ★ Includes headlight cases, canards, ABS resin door mirrors, a large rear wing, marking stickers, and masking seals for color separation.
  • ★ Fits the TT-02, TA08, TC-01, and BT-01 chassis (bodies up to 188 mm wide; some chassis require hole repositioning).
  • ★ Finish with R/C polycarbonate spray paints for a realistic, race-ready livery.

【圖片合集｜MOTUL AUTECH Z 輕量車體細節】Image Gallery

輕量車體與配件套件內容・透明車體・大型尾翼與貼紙

【以下需另購】The Following Are Sold Separately

以下塗料・遮蔽用品需另購（來源：日本田宮官網 tamiya.com / products/47530）

圖片 分類 推薦品名 Item 編號 用途・備註
PS-1 白 聚碳酸酯漆料RC車殼專用噴漆 聚碳酸酯專用噴漆 PS-1 白 86001 車身基底主色（白色）塗裝用
PS-2 紅 聚碳酸酯漆料RC車殼專用噴漆 聚碳酸酯專用噴漆 PS-2 紅 86002 NISMO紅拉花・飾條等點綴塗裝用
PS-5 黑 聚碳酸酯漆料RC車殼專用噴漆 聚碳酸酯專用噴漆 PS-5 黑 86005 車窗、深色拉花與細部分色塗裝用
遮蔽膠帶 遮蔽材塗裝遮蔽輔助材 田宮遮蔽膠帶（18mm） 87109 分色塗裝與貼紙區域遮蔽用
58735 MOTUL AUTECH Z 套件 關連商品電動RC套件 1/10RC MOTUL AUTECH Z（TT-02シャーシ）組裝套件 58735 搭載同款塗裝車殼的4WD電動RC套件，可另購搭配（需自備遙控器・電池・充電器）
57939 XB MOTUL AUTECH Z 完成品 關連商品電動RC完成品 1/10RC XB MOTUL AUTECH Z（TT-02シャーシ）完成品 57939 內含2.4G遙控器與ESC的完成車，入手即可立即玩樂