Name: Tamiya 58690 1/10 R/C Landfreeder Quadtrack TT-02FT
SKU: TA 58690
Availability: InStock

[Pickup truck equipped with a truck unit that you can enjoy driving on rough roads]?This is an electric radio control car assembly kit for a pickup truck that has a delta (triangular) shaped truck (crawler) unit mounted on the axle instead of the front and rear tires.?The chassis is based on the shaft drive 4WD TT-02.?The truck unit of interest uses a resin truck (crawler) that can be assembled using metal pins, and consists of a sprocket wheel that is connected to the drive shaft to transmit power and eight rollers.?It has a wider ground contact area than tires, and has excellent climbing performance, as well as being difficult to stack on rough roads such as snowy fields, sandy beaches, and muddy roads, and exhibits stable grip.?In addition, it is equipped with a dustproof polycarbonate chassis cover and front inner fender to improve driving reliability.?The body is made of polycarbonate, which is the image of a pickup truck from the 1980s.?The body is black, the window is smoked, and the wheel arch is cut.?In addition, the grill guard equipped with fog lamps and the roll bar are plated parts, and the scale feeling is sufficient.

[TT-02FT chassis with 4 truck units attracting attention]The chassis is based on the shaft drive 4WD TT-02, and adopts the TT-02FT with the front and rear tires changed to truck units.?The truck unit is attached to the upper and lower suspension arms, and the power of the drive shaft is transmitted to the truck by the sprocket wheel.?Eight rollers are placed on the ground plane.?In addition, it has a swing mechanism, and the third roller can move up and down independently.?The grounding property is further improved.?Of course, the extra road clearance by installing the truck unit is also a big attraction on rough roads.?The truck is made of resin and adopts a connection assembly type using metal pins.?Compared to rubber, it has less drive loss and can run smoothly even at low speeds.?Moreover, there are two types of tops (footboards), a flat standard type and a glosser type with protrusions.?It is possible to select according to the driving road surface.?The motor is equipped with a torqueful CR tune as standard equipment to improve running performance on rough roads.

[Basic specifications]?● Overall length 425 mm, overall width 247 mm, overall height 199 mm ● Wheel base 251 mm ● Track contact length 60 mm x 4 ● Track width 39 mm ● Frame = bathtub type ● Drive system = vertical motor / shaft drive 4WD ● Differential gear = resin for both front and rear Made of 4 bevel type ● Steering = 3 split tie rod type ● Suspension = 4 wheel double wishbone ● Damper = Friction both front and rear ● Gear ratio = 11.38: 1 ● Motor = CR tune ● Speed ??controller = ESC specification (sold separately

) What to receive]?●?Fine spec 2.4G electric RC drive set?● 4 AA batteries for transmitter

[YouTube] 1/10 RC Land Frieder Check out the video of the quad truck running!

The body and track unit are unique, inspired by the pickup trucks of the 1980s.
A fog lamp that tightens the look on the front and a grill guard with plated parts.
The roll bar is also a plated part.
Ensuring plenty of ground clearance (minimum ground clearance) to improve responsiveness on rough roads.

Double wishbone type front suspension equipped with friction dampers.
The truck unit has a delta shape consisting of a sprocket wheel that connects to the drive shaft to transmit power and eight rollers.
The truck unit uses a swing mechanism that enhances ground contact.?The swing mechanism can also be fixed, and it corresponds to a smooth road surface.
The third roller has a suspension function that can move up and down to improve road followability.

Based on the well-balanced shaft drive 4WD TT-02.?Equipped with 4 truck units instead of 4 tires.
Polycarbonate front inner fender and chassis cover are available.
Double wishbone type rear suspension equipped with friction dampers.
A truck that can be recombined according to the road surface.?Recommended for snowfields where only the standard type is connected from the back, inside where the Grocer type is connected every two frames, and for sandy areas where the Grocer type is connected every other frame in the