Tamiya 58757 1/9 SCALE R/C 2WD HIGH PERFORMANCE OFF ROAD RACER VOLKSWAGEN DUNE BEETLE CROSS (BB-02 CHASSIS)
$2,880.00
田宮 58757 電動RC車系列 No.757 1/9RC Volkswagen Dune Beetle Cross(BB-02底盤)
允許無庫存下單
預計發售日期:2026-12
田宮 58757 電動RC車系列 No.757 1/9RC Volkswagen Dune Beetle Cross(BB-02底盤)
【與越野激走相得益彰的福士甲蟲賽車】
這是以參戰美國西海岸沙漠賽事的福士甲蟲(Volkswagen Beetle)訂製賽車版為意象的電動RC組裝套件。前後翼子板大幅外張、拆去尾部引擎蓋的賽車版福士甲蟲造型,以聚碳酸酯車殼十足真切地重現;車頭與車身側面裝備燈組(Light Pod),裸露的車尾部分更將空氣濾清器、皮帶盤與排氣管等零件化,比例質感之高正是其魅力所在。此外,從防滾架到重現車手與副車手的座艙內部,連座椅、方向盤與波棍頭也一一重現;滿滿的實車感,令奔馳更添樂趣。
【細節講究、追求實車感的後輪驅動底盤——BB-02】底盤採用後輪驅動的BB-02:地板形狀的主車架前後一體成形輪拱罩,再組合防滾架,構成實車感十足的底盤結構。行駛用電池縱置於車體中央,馬達搭載於車體尾端,令驅動輪獲得充分的荷重。密閉式齒輪盒內建滾珠差速器;萬向節傳動軸的接頭處裝備橡膠防塵套,提升越野行駛的可靠性。底盤周邊方面,前懸掛提供雙拖曳臂與雙A臂兩種形式,後懸掛為拖曳臂式的4輪獨立懸掛;各輪均裝備漏油少的自適應油壓避震器(Adaptive Damper)。白色碟形輪圈為六角輪轂規格;前輪配備直進穩定性出色的肋狀胎紋、後輪配備抓地力重視的方形尖釘胎,兩者均內藏海綿以防輪胎變形。
【基本規格】●全長454mm、全寬204/225mm、全高180mm、軸距283mm ●前輪距=雙拖曳臂180mm/雙A臂200mm ●後輪距(共通)=200mm ●主車架=樹脂製下甲板+防滾架 ●驅動方式=後輪驅動 ●差速器=滾珠差速器 ●轉向=3段分割橫拉桿式 ●懸掛=前:雙拖曳臂/雙A臂、後:拖曳臂式4輪獨立 ●輪胎寬/直徑=前30/92mm、後38/96mm ●避震器=自適應油壓避震器 ●齒輪比=12.42:1(使用套件標準18T齒輪時)〜8.28:1共10種 ●馬達=傳動軸長10.5mm以上的540型馬達(另售) ●全滾珠軸承規格 ●速度控制器=ESC規格(另售)
【模型要點】
- ★以參戰美國西海岸沙漠賽事的福士甲蟲訂製賽車版為意象的1/9電動RC組裝套件,後輪驅動BB-02底盤。
- ★聚碳酸酯車殼真切重現翼子板外張、拆去尾部引擎蓋的賽車版福士甲蟲;車頭與側面燈組,車尾空氣濾清器、皮帶盤、排氣管等零件化,比例質感十足。
- ★防滾架+重現車手・副車手的座艙:座椅、方向盤、波棍頭甚至滅火器也一一重現。
- ★BB-02底盤:地板形狀一體成形主車架+防滾架;電池縱置車體中央、馬達後置,驅動輪荷重充分。
- ★密閉式齒輪盒內建滾珠差速器;萬向節傳動軸附橡膠防塵套,越野可靠性高。
- ★前懸掛雙拖曳臂/雙A臂兩種可選、後拖曳臂式4輪獨立;各輪裝備漏油少的自適應油壓避震器。
- ★白色碟形六角輪轂輪圈;前肋狀胎紋、後方形尖釘胎,均內藏海綿;齒輪比12.42:1〜8.28:1共10種可選。
【A Custom Beetle Born to Race Off-Road】
This is an electric R/C car assembly kit inspired by a custom Volkswagen Beetle racing in desert races held on the U.S. West Coast. The polycarbonate body convincingly recreates the race-version Beetle with flared front and rear fenders and the rear engine hood removed; light pods are mounted on the nose and sides, while the exposed rear section features separately molded parts such as the air cleaner, pulley and exhaust pipes — its high level of scale detail is a major attraction. Moreover, the interior recreates the driver and co-driver along with the roll cage, complete with seats, steering wheel and shift knob. The richly scale finish makes running all the more enjoyable.
【Pursuing Full-Size Realism Down to the Details — the 2WD BB-02 Chassis】The chassis is the rear-wheel-drive BB-02: tire houses are integrally molded at the front and rear of the floor-pan-shaped main frame, combined with the roll cage for a chassis structure brimming with full-size realism. The running battery is mounted vertically in the body center, and the motor is installed at the rear end of the body so that ample load rests on the drive wheels. The sealed gearbox contains a ball differential, and the universal drive shafts feature rubber joint boots for enhanced off-road reliability. Around the chassis, the front suspension offers two types — double trailing arms or double wishbones — with the rear using trailing arms for 4-wheel independent suspension, and each wheel is equipped with adaptive oil dampers that are less prone to leaking. White dish wheels are hex-hub specification; the front tires have rib patterns for excellent straight-line stability and the rear square-spike patterns for grip-focused performance, both with inner sponges to prevent tire deformation.
【Basic Specifications】●Length 454mm, Width 204/225mm, Height 180mm, Wheelbase 283mm ●Front tread: 180mm (double trailing arms) / 200mm (double wishbone) ●Rear tread (common): 200mm ●Main frame: Resin lower deck + roll cage ●Drivetrain: Rear-wheel drive ●Differential: Ball differential ●Steering: 3-piece split tie-rod type ●Suspension: Front double trailing arms / double wishbones, rear trailing arms — 4-wheel independent ●Tyre Width/Diameter: Front 30/92mm, Rear 38/96mm ●Dampers: Adaptive oil dampers ●Gear ratios: 12.42:1 (with kit-standard 18T pinion) to 8.28:1, 10 types ●Motor: Type 540 with drive shaft length of 10.5mm or more (sold separately) ●Full ball bearings ●Speed controller: ESC specification (sold separately).
【Model Features】
- ★ A 1/9 scale electric R/C assembly kit inspired by the custom Volkswagen Beetle racing on the U.S. West Coast, on the rear-wheel-drive BB-02 chassis.
- ★ Polycarbonate body convincingly recreates the flared-fender, rear-hood-removed race Beetle; light pods, plus air cleaner, pulley and exhaust parts for the exposed rear end offer abundant scale detail.
- ★ Roll cage and cockpit with driver & co-driver figures, seats, steering wheel, shift knob and even a fire extinguisher faithfully recreated.
- ★ BB-02 chassis: floor-pan-shaped integrally molded main frame + roll cage; vertically mounted central battery and rear-mounted motor place ample load on the drive wheels.
- ★ Sealed gearbox with built-in ball differential; universal drive shafts with rubber joint boots for reliable off-road running.
- ★ Front double-trailing-arm / double-wishbone options, rear trailing arms, 4-wheel independent suspension; adaptive oil dampers on each wheel.
- ★ White dish hex-hub wheels; front rib-pattern, rear square-spike tires with inner sponges; 10 gear ratios from 12.42:1 to 8.28:1.
【圖片合集|Volkswagen Dune Beetle Cross】Image Gallery
Volkswagen Dune Beetle Cross(照片為組裝完成的套件示例)
忠實重現福士甲蟲原本修長比例的聚碳酸酯車殼
地板形狀主車架組合防滾架、實車感十足的底盤結構
一體成形的強化樹脂主車架,前後輪拱罩亦一併造形,形狀複雜
裝備漏油少的自適應油壓避震器的前懸掛
提供直進穩定性出色的雙拖曳臂,與路面追從性優越、適合起伏較大越野路面的雙A臂兩種懸掛形式
白色碟形輪圈裝上內藏海綿的肋狀胎紋輪胎
拖曳臂式的後懸掛;萬向節傳動軸的齒輪盒側採用橡膠防塵套
後輪為抓地力重視的方形尖釘胎;頗有高度的輪胎輪廓提升了實車感
縱置於車體中央的行駛用電池,開合施有實車感雕刻的地板甲板即可更換;無需拆下車殼的快速作業
頭燈自不必說,安裝於保險桿的輔助燈也可嵌入另售的LED點亮
車窗護網與輔助燈,宣告賽車身份
附頭戴全盔的車手與副車手人偶
防滾架上的滅火器、座椅、方向盤與波棍頭等亦一一重現
空氣濾清器、皮帶盤、排氣管等引擎零件營造高比例感的車尾
從側面衝擊中守護車體的樹脂製側保險桿,實車氛圍十足
安裝於車尾防滾架的尾燈,可嵌入另售的LED點亮
描繪揚起沙塵疾馳的躍動姿態之產品包裝盒
Dune Beetle Cross 以實車化項目參戰賽事!(圖為官網公開的實車化項目照片)【以下需另購】The Following Are Sold Separately
以下需另購(來源:日本田宮官網 tamiya.com / products/58757「別にお求めいただくもの」欄目)。本產品速度控制器(ESC)規格為另售,已包含於下方2通道遙控套裝之中。
- ★540型馬達※※齒輪安裝用的馬達軸部分須為10.5mm以上的馬達(Item 53929、53779、54612等);Item 53068 運動調校馬達(Sports Tuned Motor)、54358、51673 無法使用
- ★RC電子設備:2通道遙控套裝(發射機、接收機、ESC、舵機)
- ★行駛用電池、充電器
- ★發射機用電源(AA電池等)
| 尺寸 | 454 × 204 × 180 公分 |
|---|






