Tamiya 69927 Spray-Work Air Compressor Advance w/Sparmax Airbrush SX 0.5D

田宮 69927 Spray-Work Air Compressor Advance 氣泵 (連Sparmax Airbrush SX 0.5D噴槍)

【可調節氣壓﹑採用感應式自動開關的壓縮氣泵和噴槍套裝】

Spray-Work Air Compressor Advance 氣泵可以透過頂部的旋鈕調節氣壓，使你不論是廣範圍的亮面上色或者纖細的迷彩塗裝都可以得心應手。細小輕便的本體亦方便存放。備有感應式自動開關，只要把噴槍由氣泵的掛架上取下即會自行啟動，免卻煩複的開關動作。附有易於觀察喉管內部有否積水的透明氣喉。

• AC變壓插頭為多國通用式
• 附屬的Sparmax Airbrush SX 0.5D噴槍噴嘴口徑為0.5mm

This high quality air compressor is compatible with the range of Tamiya airbrushes. Dial allows easy adjustment of air pressure, for a range of jobs from large areas to fine detail such as camouflage schemes. Airbrush hanger works with sensor switch, turning on the compressor when the airbrush is removed, and off when the airbrush is replaced again. Simply attach your airbrush via the transparent air hose, and you are ready to paint!

• Export version includes plugs for the adapter allowing use in a range of countries.
• Comes with the SX 0.5D airbrush.

【壓縮氣泵規格】

• 尺寸: 12.5x7x11.5cm (連同掛架闊10cm)
• 最大氣壓約0.20MPa (30PSI)
• 連續氣壓0.08MPa (12PSI)
• 排氣量 10L/min (無負荷時)
• 消耗功率 24W
• 運作音量 45db
• 重量約0.6kg (未計氣喉及附屬品)
• 附有AC插頭及氣喉
• 噴槍油漆杯容量 15cc

【Compressor Specifications】

• Dimensions: 12.5 x 7.0 x 11.5cm (depth: 10cm including hanger)
• Maximum output pressure: approx. 0.20MPa (30PSI)
• Continuous pressure: 0.08MPa (12PSI)
• Air output: 10 liters/min.
• Power consumption: 24W
• Noise level: 45db
• Weight: 0.6kg (not including cables and other accessories)
• AC adapter and coiled hose included.