Tamiya 42383 1/10 RC TB EVO.8 Chassis Kit

$4,180.00

Tamiya 42383 1/10 RC遙控車 TB EVO.8 底盤套裝

已售完

貨號: TA 42383 分類: 標籤:
描述

Tamiya 42383 1/10 RC遙控車 TB EVO.8 底盤套裝

【軸驅動4WD跑車底盤的最高峰】

冠以軸驅動4WD跑車底盤的最高峰 -「TB EVO」之名的新底盤相隔5年終於嶄新上市!新形狀的碳纖維底盤和最小型的上層底架組合帶來最適合駕駛的回轉剛性和底重心。底盤主要部分配備了碳纖維支架和中央補強支架,新形狀的前後鋁合金隔板亦提供了純佳的強度和驅動效率。懸掛系統使用了和TA08 PRO同樣的上下層懸掛臂形狀,使輪胎的抓地力得以發揮到極限。前後避震器使用SSBB(超短大徑)避震器作標準配置。摩打座的構造不單使空程差容易調整,亦令摩打可以選擇前中置和後中置兩個裝配位置。基於過往「TB EVO」系列的數據,再更進一步追求速度﹑操控性和維護性的,就是這台「TB EVO.8」。

【Performance Evolution】

TB EVO. series models are Tamiya’s top shaft-driven 4WD touring car chassis, and a new design is here: the TB EVO.8! Its carbon fiber deck layout features a minimalistic upper design to optimize pitch rigidity and lower the center of gravity, and also uses R/C deck and center stiffener components; aluminum bulkheads stiffen the drive train and contribute to its efficiency. Suspension arms are the same design as on the TA08 PRO and promise to get the most out of your tires, and are paired with Super Short Big Bore Dampers front and rear. A choice of motor layouts (front-midship, rear-midship) is on offer, and the chassis design allows efficient adjustment of backlash. Controllability, speed, ease of upkeep – the TB EVO.8 has it all!

【主要配置】

  • 2.25mm厚碳纖維下層底架
  • 2.mm厚碳纖維上層底架
  • 1mm厚碳纖維設置板
  • 2mm厚碳纖維防撞欄支架
  • 一體型鋁合金下層隔板 (前/後)
  • 鋁合金上層隔板 (前/後)
  • 鋁合金摩打座 A/B/C
  • 鋁合金伺服摩打座
  • 鋁合金電池固定爪
  • 鋁合金中央補強支架
  • 鋁合金直連杯
  • TRF超短大徑避震器+ (SSBB避震器+)
  • 42mm雙聯式傳動軸
  • 42mm輕量搖軸(強化型)
  • 06 硬塗層鋁合金摩打齒輪(23T)
  • 前後平衡器
  • 全車滾珠軸承

【Featured Components】

  • 2.25mm carbon fiber lower deck
  • 2mm carbon fiber upper deck
  • 1mm carbon fiber R/C deck
  • 2mm carbon fiber bumper support
  • One-piece aluminum lower bulkheads (front, rear)
  • Aluminum upper bulkheads (front, rear)
  • Aluminum motor mounts (A, B, C)
  • Aluminum servo mount
  • Aluminum battery holders
  • Aluminum center stiffener
  • Aluminum front direct cups
  • TRF Super Short Big Bore Damper+ (SSBB Damper+)
  • 42mm double cardan drive shafts
  • 42mm light-weight swing shafts (reinforced)
  • 06 module hard coated aluminum pinion gear (23T)
  • Stabilizer (Front & rear)
  • Full ball bearings

【以下需另購】

  • 車殼
  • 無刷摩打
  • 輪胎及輪圈
  • ESC電變
  • 伺服摩打
  • 2ch遙控器(發訊器及接收器)
  • 遙控車電池及充電器
  • 發訊器電池

【Separately Required Items】

  • Body
  • Brushless motor
  • Tires and wheels
  • ESC
  • Servo motor
  • 2-channel R/C system(Transmitter and receiver)
  • RC battery and charger
  • Batteries for transmitter
額外資訊
重量 2.5 公斤
遙控車底盤

電變配置(ESC)

生產狀況
評價 (0)

商品評價

目前沒有評價。

只有註冊並且購買過商品的顧客才能撰寫評價。