Tamiya 95439 1/32 Mini 4WD Gun Bluster XTO Light Blue Special (Polycarbonate Body) (FM-A Chassis)

$150.00

田宮 95439 迷你四驅特別企画 Gun Bluster XTO 淺藍特別版(聚碳酸酯車殼)

尚有庫存

油麻地旗艦店: 點擊查詢
中環PMQ元創坊分店: 點擊查詢
描述

田宮 95439 迷你四驅特別企画 Gun Bluster XTO 淺藍特別版(聚碳酸酯車殼)

【全覆式迷你四驅名車・採用聚碳酸酯車殼】

採用軸傳動四輪驅動的高性能賽車塑膠模型組裝套件。Gun Bluster XTO 淺藍特別版,是採用輕量且抗衝擊的聚碳酸酯車身的特別版本。保留充滿力量感的車身設計,輪拱部分已施以切割加工,組裝也輕鬆簡單。FM-A 底盤與足部周邊以淺藍色協調搭配,與透明車身一同提升酷炫印象。從黃色漸變至紅色的圖案與頭燈等,以透明類型貼紙表現。

底盤採用融入空力設計的前馬達佈局 FM-A。重心位於車體前部,在上下起伏較多的賽道也能實現穩定行駛。前下部標準配備低摩擦樹脂製滑桿,4 顆導輪也採用低摩擦樹脂製;特別是後導輪選用提升穩定性的 8mm 厚類型。此外,馬達可從底盤底面簡單更換,設定變更也迅速。以飛機機翼截面形狀為靈感製作的空力側板,可安裝各種零件。底盤本體為淺藍色 ABS 樹脂製,底板與滑桿等低摩擦樹脂 A 零件也統一為淺藍色。白色螺旋輻條輪圈搭配淺藍色低高度輪胎,齒輪比設定為 3.5:1。

【基本規格】●完成時全長156mm、全寬97mm、全高38mm ●附馬達 ●組裝免接著劑,嵌合與螺絲固定
【初回發售月】2019年1月發售

【模型要點】

  • ★全覆式(フルカウル)迷你四驅名車 Gun Bluster XTO 的聚碳酸酯車殼特別版,1/32比例塑膠模型組裝套件。
  • ★輕量且抗衝擊的透明聚碳酸酯車身,輪拱已切割加工,組裝輕鬆;黃→紅漸層圖案與頭燈採透明貼紙。
  • ★FM-A底盤與足部統一淺藍配色,透明車身與漸層火焰圖案營造酷炫造型。
  • ★前馬達佈局FM-A底盤,重心靠前,起伏賽道行駛穩定;馬達可從底盤底面簡單更換。
  • ★前部標配低摩擦樹脂滑桿+4顆低摩擦導輪(後導輪8mm厚);機翼截面靈感的空力側板可裝設各種零件。
  • ★白色螺旋輻條輪圈+淺藍低高度輪胎,齒輪比3.5:1;附馬達,嵌合與螺絲固定即可組裝。

【Polycarbonate Body for a Fully Cowled Mini 4WD Classic】

This is a plastic model assembly kit of a high-performance racer with shaft-driven four-wheel drive. The Gun Bluster XTO Light Blue Special is a special version equipped with a lightweight, impact-resistant polycarbonate body. The powerful body design is retained, and with the wheel arches pre-cut, assembly is quick and easy. The FM-A chassis and running gear are color-coordinated in light blue, heightening the cool impression together with the clear body. Graphics transitioning from yellow to red, along with the headlight, are depicted with clear-type stickers.

The chassis adopts the front-motor-layout FM-A with its aero-inspired design. With the center of gravity toward the front of the body, stable running is possible even on courses with frequent elevation changes. A low-friction resin skid bar is standard at the front underside, and all four rollers are also low-friction resin; the rear rollers in particular use an 8mm-thick type for enhanced stability. In addition, the motor can be easily swapped from the underside of the chassis for quick setting changes. The aero side stays — inspired by the cross-section of an aircraft wing — accept a variety of parts. The chassis body is molded in light blue ABS resin, with low-friction resin A-parts such as the underpanel and skid bar unified in light blue as well. White spiral-spoke wheels are fitted with light blue low-height tires, and the gear ratio is set at 3.5:1.

[Basic Spec] Length 156 mm, width 97 mm, height 38 mm when completed / motor included / snap-together and screw attachment assembly, no glue required
[First Release] January 2019

【Model Features】

  • ★ Polycarbonate-body special edition of the fully cowled Mini 4WD classic Gun Bluster XTO; 1/32 scale plastic model assembly kit.
  • ★ Lightweight, impact-resistant clear polycarbonate body with pre-cut wheel arches for easy assembly; yellow-to-red gradient graphics and headlight in clear stickers.
  • ★ FM-A chassis and running gear unified in light blue, paired with the clear body for a cool styling.
  • ★ Front-motor FM-A layout keeps gravity forward for stable running on undulating courses; motor swaps easily from the chassis underside.
  • ★ Low-friction resin skid bar up front plus 4 low-friction rollers (8mm-thick rears); wing-section-inspired aero side stays accept various parts.
  • ★ White spiral-spoke wheels with light blue low-height tires; 3.5:1 gear ratio; motor included, no-glue snap-and-screw assembly.

【圖片合集|Gunblaster XTO 淺藍特別版細節】Image Gallery

【以下需另購】The Following Are Sold Separately

以下電池・關連商品・另售零件需另購(來源:日本田宮官網 tamiya.com / products/95439)

圖片 分類 推薦品名 Item 編號 用途・備註
— 電源驅動用電池 單3形電池(R6/AA/UM3)2 顆 — 車輛驅動動力來源
19451 Gunblaster XTO Premium 關連商品迷你四驅 迷你四驅 Gunblaster XTO Premium(FM-A底盤) 19451 同車款的高級版本,可對照選購
15464 HG 19mm全鋁軸承滾輪 另售改裝滾輪・導輪 HG 19mm 全鋁軸承滾輪套組 15464 導輪升級用,低摩擦滾動更順
額外資訊
重量0.3 公斤
底盤屬性
迷你四驅車底盤
商品屬性四驅兄弟
車殼